Tidak ada produk dalam daftar keinginan.
Tidak ada produk di keranjang.
Rp350,000.00
DAPPRA LRS-350-24 (SKU: PN50) is a 350W single output low-profile enclosed switching power supply with 24V DC / 14.6A output. Selectable 90–132 VAC / 180–264 VAC input by switch, 88% typical efficiency, built-in cooling fan, 30 mm 1U low-profile metal mesh case, 3-year warranty — ideal for industrial automation, control systems and electromechanical equipment.
The DAPPRA LRS-350-24 (internal code PN50) is a 350W single-output enclosed switching power supply delivering 24V DC at 14.6A. It belongs to the LRS Series low-profile 1U platform, which uses a 30mm-high metal mesh case with perforated ventilation for efficient heat dissipation in industrial cabinets and equipment.
The unit uses selectable AC input — 90–132VAC or 180–264VAC by switch — and achieves 88% typical efficiency at 230VAC full load. Forced air cooling is provided by a built-in DC fan with Fan ON/OFF control, which turns the fan ON at approximately 50°C and OFF at approximately 40°C to reduce acoustic noise and dust intake under light-load conditions.
Protection includes short circuit, overload (hiccup mode, auto-recovery), over voltage and over temperature protection. The LRS-350-24 is suitable for industrial automation machinery, control systems, electromechanical equipment and electronic instruments that require a compact 24V enclosed power supply with forced air cooling.
A 350W 24V enclosed power supply with 1U low-profile design and intelligent fan cooling.
| Model | LRS-350-24 (PN50) |
| DC Voltage | 24V |
| Rated Current | 14.6A |
| Current Range | 0–14.6A |
| Rated Power | 350.4W |
| Ripple & Noise (max.) | 150mVp-p |
| Voltage Adjustment | Approx. ±10% (21.6–26.4V) |
| Voltage Tolerance | ±1.0% |
| Line Regulation | ±0.5% |
| Load Regulation | ±0.5% |
| Hold-up Time (typ.) | ≥16ms @ 230VAC full load |
| Setup / Rise Time (typ.) | 1000ms / 50ms |
| Overload | 110–150% rated output, hiccup mode, auto-recovery |
| Over Voltage | Shutdown with auto-recovery |
| Over Temperature | Shutdown with auto-recovery |
| Short Circuit | Auto-recovery |
| Voltage | 90–132VAC / 180–264VAC (selectable by switch) |
| Frequency | 47–63Hz |
| AC Current (typ.) | 6.8A @ 115VAC · 3.4A @ 230VAC |
| Inrush Current (typ.) | 60A @ 230VAC cold start |
| Power Factor (typ.) | ≥0.95 @ 230VAC full load |
| Leakage Current | <3.5mA @ 240VAC |
| Efficiency (typ.) | 88% @ 230VAC full load |
| Voltage Adjustment | +V ADJ potentiometer |
| Power-On Indication | Front-panel LED |
| Cooling | Built-in DC fan, Fan ON/OFF control |
| Fan ON / OFF | ON at RTH3 ≥50°C · OFF at ≤40°C |
| Working Temperature | -25 ~ +70°C (derating above +50°C) |
| Storage Temperature | -40 ~ +85°C |
| Working Humidity | 20–90% RH non-condensing |
| Vibration | 10–500Hz, 2G, 10min/cycle, 60min each axis |
| Operating Altitude | Up to 5000m (derating above 2000m) |
| Pollution Degree | 2 |
| Safety Standards | IEC/UL 62368-1, TUV BS EN/EN62368-1, BS EN/EN60335-1, BS EN/EN61558-1/-2-16, GB 4943.1, BSMI CNS15598-1, EAC TP TC 004, BIS IS13252 |
| Withstand Voltage | I/P–O/P: 3kVAC |
| Isolation Resistance | 100MΩ / 500VDC |
| EMC Immunity | BS EN/EN61000-6-2 industrial immunity level |
| Harmonic Current | Complies with BS EN/EN61000-3-2 (model dependent) |
| Dimensions (L×W×H) | Approx. 215 × 115 × 30 mm (1U) |
| Weight | Approx. 0.76 kg |
| Housing | Metal mesh case, perforated ventilation |
| Mounting | Chassis bottom mounting (M4 screws) |
| Cooling | Forced air, built-in DC fan |
| Warranty | 3 Years |
| +V ADJ | Output voltage adjustment potentiometer (approx. ±10%) |
| LED | Power-on indicator |
| Input Switch | 115V / 230V selector (90–132VAC / 180–264VAC) |
1U low-profile enclosed metal mesh case. All dimensions in mm, tolerance ±1 mm.
| Length (L) | Approx. 215 mm |
| Width (W) | Approx. 115 mm |
| Height (H) | 30 mm (1U) |
| Weight | Approx. 0.76 kg |
| Housing | Metal mesh case |
| Top / Bottom | 40 mm / 20 mm |
| Left / Right | 5 mm / 5 mm |
| Mounting | Chassis bottom mounting (M4) |
| Airflow | Keep fan intake/exhaust unobstructed |
| Adjacent Heat Source | Keep at least 100 mm clearance |
The LRS-350-24 uses an enclosed chassis design for standalone mounting inside industrial equipment. Adequate ventilation clearance is required.
Mount the unit on a flat metal surface using the chassis mounting holes. Secure with M4 screws to prevent vibration and movement.
Allow at least 5 mm left/right, 40 mm above and 20 mm below. Do not block the perforated ventilation openings or fan intake/exhaust.
Set the 115V/230V selector switch to match the actual mains voltage before applying power. Wrong setting can damage the unit.
TB1 Pin 3 (FG) must be connected to PE (Protective Earth) for safety and EMC performance.
-25 to +70°C. Full rated output up to +50°C; derate above +50°C according to the derating curve.
Install in a dry, well-ventilated location. Do not install near water or in high-moisture environments.
9-pin screw terminal block for input and output connections. Use stranded copper wire only.
| Pin | Assignment |
|---|---|
| 1 | AC/L |
| 2 | AC/N |
| 3 | FG (must connect to PE) |
| 4, 5, 6 | DC OUTPUT -V |
| 7, 8, 9 | DC OUTPUT +V |
| Screw Torque | 8–10 kgf-cm (7–9 Lb-in) |
| Wire Type | Stranded copper only, 80°C minimum |
| Recommended Wire (14.6A) | 14 AWG (2.0 mm²) or 12 AWG |
| Wire Strapping Length | 5 mm (0.197") |
| Screwdriver | 3 mm or 4 mm slotted |
| FG Connection | Must be connected to PE |
All three −V pins (4, 5, 6) and all three +V pins (7, 8, 9) should be connected to their respective output wires to prevent excessive current stress on a single contact. Verify the input voltage selector switch position before applying power.
Contact DAPPRA Automation — or explore the full LRS Series.
The LRS-350-24 (internal code PN50) is a 350W single-output enclosed switching power supply delivering 24V DC at 14.6A. It belongs to the DAPPRA LRS Series low-profile 1U platform, features selectable AC input 90–132VAC / 180–264VAC by switch, 88% typical efficiency, forced air cooling with built-in DC fan and Fan ON/OFF control, and a 3-year warranty.
The LRS-350-24 uses selectable AC input: 90–132VAC or 180–264VAC, selected by the input voltage selector switch. Input frequency is 47–63Hz.
The LRS-350-24 provides 24V DC at 14.6A for a rated output of 350.4W, with an output voltage adjustment range of approximately ±10% via the front-panel +V ADJ potentiometer.
Yes. The LRS-350-24 uses forced air cooling with a built-in DC fan and Fan ON/OFF control. The fan turns ON when the internal temperature reaches approximately 50°C and turns OFF when it falls to approximately 40°C.
The LRS-350-24 achieves 88% typical efficiency at 230VAC full load.
The LRS-350-24 uses a 9-pin screw terminal block: Pin 1 = AC/L, Pin 2 = AC/N, Pin 3 = FG (Frame Ground), Pins 4, 5, 6 = DC OUTPUT -V, Pins 7, 8, 9 = DC OUTPUT +V. All output pins should be connected to their respective output wires.
The LRS-350-24 measures approximately 215 × 115 × 30 mm (L × W × H), maintaining the 1U low-profile form factor of the LRS Series.
The LRS-350-24 operates from -25°C to +70°C, with derating required above +50°C ambient.
Both models share the same 350W LRS-350 platform, 9-pin terminal layout, forced air cooling with built-in fan, selectable AC input and 1U low-profile housing. They differ in output: LRS-350-24 (PN50) provides 24V DC at 14.6A (350.4W) with 88% efficiency, while LRS-350-48 (OJ24) provides 48V DC at 7.3A (350.4W) with 89% efficiency.
Hanya pelanggan yang telah membeli produk ini dapat memberikan ulasan.
DRM-0840-R Relay Safety Light Curtain Industrial Area Sensor
DRM-1020-R Relay Safety Light Curtain Industrial Area Sensor
The DAPPRA LRS-350-24 (internal code PN50) is a 350W single-output enclosed switching power supply delivering 24V DC at 14.6A. It belongs to the LRS Series low-profile 1U platform, which uses a 30mm-high metal mesh case with perforated ventilation for efficient heat dissipation in industrial cabinets and equipment.
The unit uses selectable AC input — 90–132VAC or 180–264VAC by switch — and achieves 88% typical efficiency at 230VAC full load. Forced air cooling is provided by a built-in DC fan with Fan ON/OFF control, which turns the fan ON at approximately 50°C and OFF at approximately 40°C to reduce acoustic noise and dust intake under light-load conditions.
Protection includes short circuit, overload (hiccup mode, auto-recovery), over voltage and over temperature protection. The LRS-350-24 is suitable for industrial automation machinery, control systems, electromechanical equipment and electronic instruments that require a compact 24V enclosed power supply with forced air cooling.
A 350W 24V enclosed power supply with 1U low-profile design and intelligent fan cooling.
| Model | LRS-350-24 (PN50) |
| DC Voltage | 24V |
| Rated Current | 14.6A |
| Current Range | 0–14.6A |
| Rated Power | 350.4W |
| Ripple & Noise (max.) | 150mVp-p |
| Voltage Adjustment | Approx. ±10% (21.6–26.4V) |
| Voltage Tolerance | ±1.0% |
| Line Regulation | ±0.5% |
| Load Regulation | ±0.5% |
| Hold-up Time (typ.) | ≥16ms @ 230VAC full load |
| Setup / Rise Time (typ.) | 1000ms / 50ms |
| Overload | 110–150% rated output, hiccup mode, auto-recovery |
| Over Voltage | Shutdown with auto-recovery |
| Over Temperature | Shutdown with auto-recovery |
| Short Circuit | Auto-recovery |
| Voltage | 90–132VAC / 180–264VAC (selectable by switch) |
| Frequency | 47–63Hz |
| AC Current (typ.) | 6.8A @ 115VAC · 3.4A @ 230VAC |
| Inrush Current (typ.) | 60A @ 230VAC cold start |
| Power Factor (typ.) | ≥0.95 @ 230VAC full load |
| Leakage Current | <3.5mA @ 240VAC |
| Efficiency (typ.) | 88% @ 230VAC full load |
| Voltage Adjustment | +V ADJ potentiometer |
| Power-On Indication | Front-panel LED |
| Cooling | Built-in DC fan, Fan ON/OFF control |
| Fan ON / OFF | ON at RTH3 ≥50°C · OFF at ≤40°C |
| Working Temperature | -25 ~ +70°C (derating above +50°C) |
| Storage Temperature | -40 ~ +85°C |
| Working Humidity | 20–90% RH non-condensing |
| Vibration | 10–500Hz, 2G, 10min/cycle, 60min each axis |
| Operating Altitude | Up to 5000m (derating above 2000m) |
| Pollution Degree | 2 |
| Safety Standards | IEC/UL 62368-1, TUV BS EN/EN62368-1, BS EN/EN60335-1, BS EN/EN61558-1/-2-16, GB 4943.1, BSMI CNS15598-1, EAC TP TC 004, BIS IS13252 |
| Withstand Voltage | I/P–O/P: 3kVAC |
| Isolation Resistance | 100MΩ / 500VDC |
| EMC Immunity | BS EN/EN61000-6-2 industrial immunity level |
| Harmonic Current | Complies with BS EN/EN61000-3-2 (model dependent) |
| Dimensions (L×W×H) | Approx. 215 × 115 × 30 mm (1U) |
| Weight | Approx. 0.76 kg |
| Housing | Metal mesh case, perforated ventilation |
| Mounting | Chassis bottom mounting (M4 screws) |
| Cooling | Forced air, built-in DC fan |
| Warranty | 3 Years |
| +V ADJ | Output voltage adjustment potentiometer (approx. ±10%) |
| LED | Power-on indicator |
| Input Switch | 115V / 230V selector (90–132VAC / 180–264VAC) |
1U low-profile enclosed metal mesh case. All dimensions in mm, tolerance ±1 mm.
| Length (L) | Approx. 215 mm |
| Width (W) | Approx. 115 mm |
| Height (H) | 30 mm (1U) |
| Weight | Approx. 0.76 kg |
| Housing | Metal mesh case |
| Top / Bottom | 40 mm / 20 mm |
| Left / Right | 5 mm / 5 mm |
| Mounting | Chassis bottom mounting (M4) |
| Airflow | Keep fan intake/exhaust unobstructed |
| Adjacent Heat Source | Keep at least 100 mm clearance |
The LRS-350-24 uses an enclosed chassis design for standalone mounting inside industrial equipment. Adequate ventilation clearance is required.
Mount the unit on a flat metal surface using the chassis mounting holes. Secure with M4 screws to prevent vibration and movement.
Allow at least 5 mm left/right, 40 mm above and 20 mm below. Do not block the perforated ventilation openings or fan intake/exhaust.
Set the 115V/230V selector switch to match the actual mains voltage before applying power. Wrong setting can damage the unit.
TB1 Pin 3 (FG) must be connected to PE (Protective Earth) for safety and EMC performance.
-25 to +70°C. Full rated output up to +50°C; derate above +50°C according to the derating curve.
Install in a dry, well-ventilated location. Do not install near water or in high-moisture environments.
9-pin screw terminal block for input and output connections. Use stranded copper wire only.
| Pin | Assignment |
|---|---|
| 1 | AC/L |
| 2 | AC/N |
| 3 | FG (must connect to PE) |
| 4, 5, 6 | DC OUTPUT -V |
| 7, 8, 9 | DC OUTPUT +V |
| Screw Torque | 8–10 kgf-cm (7–9 Lb-in) |
| Wire Type | Stranded copper only, 80°C minimum |
| Recommended Wire (14.6A) | 14 AWG (2.0 mm²) or 12 AWG |
| Wire Strapping Length | 5 mm (0.197") |
| Screwdriver | 3 mm or 4 mm slotted |
| FG Connection | Must be connected to PE |
All three −V pins (4, 5, 6) and all three +V pins (7, 8, 9) should be connected to their respective output wires to prevent excessive current stress on a single contact. Verify the input voltage selector switch position before applying power.
Contact DAPPRA Automation — or explore the full LRS Series.
The LRS-350-24 (internal code PN50) is a 350W single-output enclosed switching power supply delivering 24V DC at 14.6A. It belongs to the DAPPRA LRS Series low-profile 1U platform, features selectable AC input 90–132VAC / 180–264VAC by switch, 88% typical efficiency, forced air cooling with built-in DC fan and Fan ON/OFF control, and a 3-year warranty.
The LRS-350-24 uses selectable AC input: 90–132VAC or 180–264VAC, selected by the input voltage selector switch. Input frequency is 47–63Hz.
The LRS-350-24 provides 24V DC at 14.6A for a rated output of 350.4W, with an output voltage adjustment range of approximately ±10% via the front-panel +V ADJ potentiometer.
Yes. The LRS-350-24 uses forced air cooling with a built-in DC fan and Fan ON/OFF control. The fan turns ON when the internal temperature reaches approximately 50°C and turns OFF when it falls to approximately 40°C.
The LRS-350-24 achieves 88% typical efficiency at 230VAC full load.
The LRS-350-24 uses a 9-pin screw terminal block: Pin 1 = AC/L, Pin 2 = AC/N, Pin 3 = FG (Frame Ground), Pins 4, 5, 6 = DC OUTPUT -V, Pins 7, 8, 9 = DC OUTPUT +V. All output pins should be connected to their respective output wires.
The LRS-350-24 measures approximately 215 × 115 × 30 mm (L × W × H), maintaining the 1U low-profile form factor of the LRS Series.
The LRS-350-24 operates from -25°C to +70°C, with derating required above +50°C ambient.
Both models share the same 350W LRS-350 platform, 9-pin terminal layout, forced air cooling with built-in fan, selectable AC input and 1U low-profile housing. They differ in output: LRS-350-24 (PN50) provides 24V DC at 14.6A (350.4W) with 88% efficiency, while LRS-350-48 (OJ24) provides 48V DC at 7.3A (350.4W) with 89% efficiency.
Belum ada ulasan.
Hanya pelanggan yang telah membeli produk ini dapat memberikan ulasan.
Ulasan
Belum ada ulasan.