PLC CP1E-N20DR-A CP1EN20DRA CP1E-N20DR PB36

PLC CP1E-N20DR-A CP1EN20DRA CP1E-N20DR PB36

Feature:
with built-in three ports: USB, RS-232C, RS-485
Complete High-speed Counter Functionality
Versatile pulse control for Transistor Output
PWM Outputs for Transistor Output
Supply Voltage: 100 to 240 VAC 50/60 Hz
Operating Voltage Range: 85 to 264 VAC
Maximum number of I/O points: 20
Built-in I/O: 20 (12 inputs, 8 outputs)
High-speed counter mode/ maximum frequency: Incremental Pulse Inputs 100 kHz: 2 counters,10 kHz: 4 counters; Up/Down Inputs 100 kHz: 1 counters,10 kHz: 1 counters; Pulse + Direction Inputs 100 kHz: 2 counters; Differential Phase Inputs (4x) 50 kHz: 1 counter, 5 kHz: 1 counter
Counting mode: Linear mode; Ring mode
Count value: 32 bits

SPEK:
Input interrupts: 6 inputs (4 inputs only for 10 I/O points); interrupt input pulse width: 50 microSec Minimal
Quick-response inputs: 6 inputs (4 inputs only for 10 I/O points); Input pulse width: 50 microSec Minimal
Input constants (Normal input) : Delays can be set in the PLC Setup (0 to 32 ms, default: 8 ms); Set values: 0, 1 ,2, 4, 8, 16 or 32 ms
Output mode: Continuous mode
Analog input: Setting range: 0 to 6000 (2 channels only for NA-type)
Analog output: Setting range: 0 to 6000 (1 channels only for NA-type)
Analog Adjusters: None
B-type Peripheral USB Port: USB 2.0 B type connector), 5 M Maximum
Built-in RS-232C port: EIA RS-232C; Communication method: Half duplex; Synchronization: Start-stop; Baud rate: 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, or 115.2 kbps; Transmission distance: 15 M Maximum; Host Link; 1:N NT Link; No-protocol mode; Serial PLC Links (master, slave); Modbus-RTU Easy Master
Built-in EEPROM: Ladder programs and parameters are automatically saved to built-in EEPROM; A section of the Data Memory Area can be saved to the built-in EEPROM.