MDR-60-12 12V 5A 60W AC DC Industrial DIN rail power supply
Rp290,000.00
Tanya dulu via WhatsApp
Share:
MDR-60-12 Overview
The DAPPRA MDR-60-12 (SKU: OE86) is the 12V model in the 60W MDR tier. It provides 12V DC at 5A from a universal 85–264 VAC input, delivering 60W of rated output power in a 40 mm blue plastic housing. It is the natural upgrade from the MDR-40-12 when the combined load exceeds 3.33A but remains within 5A.
Unlike the MDR-10 and MDR-20 tiers, the MDR-60-12 includes a dry DC OK relay contact (30V/1A) on TB2 pins 5–6, enabling direct wiring to a PLC digital input without an external interposing relay. It also adds a +V ADJ potentiometer (12–15V), overload hiccup protection and over-voltage shutdown (13.8–16.2V). The unit is certified for Class I, Division 2 T4 hazardous locations and operates from −20°C to +70°C with derating above 50°C.
MDR-60-12 Key Features
- 60W Output · 12V / 5A12V DC at 5A (0–5A), 60W. +V ADJ 12–15V.
- DC OK Relay ContactDry relay contact (30V/1A) on TB2 pins 5–6 for direct PLC input.
- 40 mm HousingBlue plastic, 40 × 90 × 100 mm.
- Class I, Div 2 T4Certified for hazardous locations (confirm model certificate).
- Hiccup-Mode Overload105–150% constant-current limiting with auto-recovery.
- Efficiency 85%Higher than MDR-60-5 (78%).
- TS35 DIN RailTS35/7.5 or 15, vertical only.
MDR-60-12 Specifications
Output
| DC Voltage | 12V |
| Rated Current | 5A |
| Range | 0–5A |
| Power | 60W |
| Ripple | 120mVp-p |
| Adjustment | 12–15V |
| Tolerance | ±1.0% |
Input
| Voltage | 85–264VAC · 120–370VDC |
| Efficiency | 85% |
| No-Load | <0.75W |
Protection
| Overload | 105–150% · Hiccup · Auto-recovery |
| Over Voltage | 13.8–16.2V · Shutdown · Re-power |
MDR-60-12 Dimensions
| Width | 40 mm |
| Height | 90 mm |
| Depth | 100 mm |
| Weight | ~0.30 kg |
| Top/Bottom | 40 / 20 mm |
| Sides | 5 mm |
| DIN Rail | TS35/7.5 or 15 |
MDR-60-12 Installation
Vertical Only
Input bottom, output top.
Clearances
5 mm sides, 40 mm top, 20 mm bottom.
TS35 Rail
TS35/7.5 or 15.
FG to PE
Frame ground to earth.
Temperature
−20 to +70°C, derate above 50°C.
Div 2 T4
Verify hazardous-location certificate for your site.
MDR-60-12 Wiring
| Pin | Assignment |
|---|---|
| 1 | FG |
| 2 | AC/N |
| 3 | AC/L |
| Pin | Assignment |
|---|---|
| 1,2 | +V |
| 3,4 | −V |
| 5,6 | DC OK relay contact (30V/1A) |
MDR-60-12 Safety & Cautions
- Qualified technician only.
- Do not connect primary and secondary.
- Burn hazard.
- Protect openings.
- FG to PE.
- Do not exceed 5A / 60W.
- Do not use DC OK relay as power output.
- Disconnect before maintenance.
MDR-60-12 Industrial Applications
Need the MDR-60-12?
Contact DAPPRA Automation — or explore the full MDR Series.
MDR-60-12 FAQ
What is the DAPPRA MDR-60-12?
The DAPPRA MDR-60-12 (SKU: OE86) is a 60W single-output industrial DIN rail power supply providing 12V DC at 5A from a universal 85–264VAC input, in a 40 mm blue plastic housing with fanless cooling, DC OK relay contact and +V ADJ adjustment.
How does the MDR-60-12 differ from the MDR-40-12?
The MDR-60-12 increases output current from 3.33A to 5A at the same 12V output, and widens the housing from 40 mm (MDR-40 is also 40 mm, but the 60W model provides more current in the same width). It is the better choice when the combined load exceeds 3.33A but still fits within 5A.
Can the MDR-60-12 supply a 12V load drawing 5A continuously?
Yes, 5A at 12V equals the 60W rated output. Continuous full-load operation is specified up to 50°C ambient (with derating above 50°C). Verify cabinet temperature and clearance requirements before planning continuous full-load operation.
Does the MDR-60-12 have a DC OK relay contact or active signal?
The MDR-60-12 has a DC OK relay contact rated 30V/1A resistive load on two terminal pins (pins 5 and 6 of TB2). This is a dry contact suitable for direct wiring to a PLC digital input, unlike the active signal used on MDR-10 and MDR-20 models.
What is the output voltage adjustment range of the MDR-60-12?
The MDR-60-12 includes a front-panel +V ADJ potentiometer with a 12–15V adjustment range. Verify the maximum input voltage of connected 12V devices before increasing the setting.
What is the over-voltage protection threshold of the MDR-60-12?
Over-voltage protection triggers at 13.8–16.2V. The output shuts down and requires re-powering to recover.
What is the typical efficiency of the MDR-60-12?
The MDR-60-12 achieves 85% typical efficiency at 230VAC input and full load, higher than the MDR-60-5 (78%) and comparable to the MDR-60-24 (87%).
What is the input voltage range of the MDR-60-12?
85–264VAC single phase (47–63Hz) or 120–370VDC. Do not connect directly to 380VAC three-phase.
What protection functions does the MDR-60-12 include?
Short-circuit protection, overload protection (above 105%, hiccup mode auto-recovery) and over-voltage protection (13.8–16.2V, shutdown and re-power to recover).
Is the MDR-60-12 DIN rail mountable?
Yes, TS35/7.5 or TS35/15 DIN rail, 40 mm housing width, vertical orientation only.
What are the dimensions and weight of the MDR-60-12?
40 × 90 × 100 mm (W × H × D), approximately 0.30 kg.
What is the terminal pin assignment of the MDR-60-12?
TB1: Pin 1 = FG, Pin 2 = AC/N, Pin 3 = AC/L. TB2 (6 pins): Pins 1,2 = +V; Pins 3,4 = −V; Pins 5,6 = DC OK relay contact.
Can the MDR-60-12 drive 12V solenoids or small motors?
Small 12V solenoids or DC motors can be powered if their steady-state and startup current fall within 5A and the inductive kick is suppressed externally. For motors with high startup surge, verify the inrush current does not exceed the 105–150% overload window and add a flyback diode for inductive loads.
What is the ripple and noise of the MDR-60-12?
Maximum 120mVp-p, measured at 20MHz bandwidth with a 0.1μF and 47μF parallel capacitor.
What certifications does the MDR-60-12 have?
UL508, UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004, BSMI CNS14336-1 and AS/NZS 60950.1. MDR-60-12 is also certified for Class I, Division 2 Hazardous Locations T4 (confirm certificate coverage for your market).
Related Technical Articles
13 ulasan untuk MDR-60-12 12V 5A 60W AC DC Industrial DIN rail power supply
Hanya pelanggan yang telah membeli produk ini dapat memberikan ulasan.
Mungkin Anda suka
-
-
-
-
DRM-0840-R Relay Safety Light Curtain Industrial Area Sensor
Rp2,300,000.00 -
DRM-1020-R Relay Safety Light Curtain Industrial Area Sensor
Rp1,520,000.00 -
DRM-0620-R Relay Safety Light Curtain Industrial Area Sensor
Rp1,300,000.00
Related Technical Articles
MDR-60-12 Overview
The DAPPRA MDR-60-12 (SKU: OE86) is the 12V model in the 60W MDR tier. It provides 12V DC at 5A from a universal 85–264 VAC input, delivering 60W of rated output power in a 40 mm blue plastic housing. It is the natural upgrade from the MDR-40-12 when the combined load exceeds 3.33A but remains within 5A.
Unlike the MDR-10 and MDR-20 tiers, the MDR-60-12 includes a dry DC OK relay contact (30V/1A) on TB2 pins 5–6, enabling direct wiring to a PLC digital input without an external interposing relay. It also adds a +V ADJ potentiometer (12–15V), overload hiccup protection and over-voltage shutdown (13.8–16.2V). The unit is certified for Class I, Division 2 T4 hazardous locations and operates from −20°C to +70°C with derating above 50°C.
MDR-60-12 Key Features
- 60W Output · 12V / 5A12V DC at 5A (0–5A), 60W. +V ADJ 12–15V.
- DC OK Relay ContactDry relay contact (30V/1A) on TB2 pins 5–6 for direct PLC input.
- 40 mm HousingBlue plastic, 40 × 90 × 100 mm.
- Class I, Div 2 T4Certified for hazardous locations (confirm model certificate).
- Hiccup-Mode Overload105–150% constant-current limiting with auto-recovery.
- Efficiency 85%Higher than MDR-60-5 (78%).
- TS35 DIN RailTS35/7.5 or 15, vertical only.
MDR-60-12 Specifications
Output
| DC Voltage | 12V |
| Rated Current | 5A |
| Range | 0–5A |
| Power | 60W |
| Ripple | 120mVp-p |
| Adjustment | 12–15V |
| Tolerance | ±1.0% |
Input
| Voltage | 85–264VAC · 120–370VDC |
| Efficiency | 85% |
| No-Load | <0.75W |
Protection
| Overload | 105–150% · Hiccup · Auto-recovery |
| Over Voltage | 13.8–16.2V · Shutdown · Re-power |
MDR-60-12 Dimensions
| Width | 40 mm |
| Height | 90 mm |
| Depth | 100 mm |
| Weight | ~0.30 kg |
| Top/Bottom | 40 / 20 mm |
| Sides | 5 mm |
| DIN Rail | TS35/7.5 or 15 |
MDR-60-12 Installation
Vertical Only
Input bottom, output top.
Clearances
5 mm sides, 40 mm top, 20 mm bottom.
TS35 Rail
TS35/7.5 or 15.
FG to PE
Frame ground to earth.
Temperature
−20 to +70°C, derate above 50°C.
Div 2 T4
Verify hazardous-location certificate for your site.
MDR-60-12 Wiring
| Pin | Assignment |
|---|---|
| 1 | FG |
| 2 | AC/N |
| 3 | AC/L |
| Pin | Assignment |
|---|---|
| 1,2 | +V |
| 3,4 | −V |
| 5,6 | DC OK relay contact (30V/1A) |
MDR-60-12 Safety & Cautions
- Qualified technician only.
- Do not connect primary and secondary.
- Burn hazard.
- Protect openings.
- FG to PE.
- Do not exceed 5A / 60W.
- Do not use DC OK relay as power output.
- Disconnect before maintenance.
MDR-60-12 Industrial Applications
Need the MDR-60-12?
Contact DAPPRA Automation — or explore the full MDR Series.
MDR-60-12 FAQ
What is the DAPPRA MDR-60-12?
The DAPPRA MDR-60-12 (SKU: OE86) is a 60W single-output industrial DIN rail power supply providing 12V DC at 5A from a universal 85–264VAC input, in a 40 mm blue plastic housing with fanless cooling, DC OK relay contact and +V ADJ adjustment.
How does the MDR-60-12 differ from the MDR-40-12?
The MDR-60-12 increases output current from 3.33A to 5A at the same 12V output, and widens the housing from 40 mm (MDR-40 is also 40 mm, but the 60W model provides more current in the same width). It is the better choice when the combined load exceeds 3.33A but still fits within 5A.
Can the MDR-60-12 supply a 12V load drawing 5A continuously?
Yes, 5A at 12V equals the 60W rated output. Continuous full-load operation is specified up to 50°C ambient (with derating above 50°C). Verify cabinet temperature and clearance requirements before planning continuous full-load operation.
Does the MDR-60-12 have a DC OK relay contact or active signal?
The MDR-60-12 has a DC OK relay contact rated 30V/1A resistive load on two terminal pins (pins 5 and 6 of TB2). This is a dry contact suitable for direct wiring to a PLC digital input, unlike the active signal used on MDR-10 and MDR-20 models.
What is the output voltage adjustment range of the MDR-60-12?
The MDR-60-12 includes a front-panel +V ADJ potentiometer with a 12–15V adjustment range. Verify the maximum input voltage of connected 12V devices before increasing the setting.
What is the over-voltage protection threshold of the MDR-60-12?
Over-voltage protection triggers at 13.8–16.2V. The output shuts down and requires re-powering to recover.
What is the typical efficiency of the MDR-60-12?
The MDR-60-12 achieves 85% typical efficiency at 230VAC input and full load, higher than the MDR-60-5 (78%) and comparable to the MDR-60-24 (87%).
What is the input voltage range of the MDR-60-12?
85–264VAC single phase (47–63Hz) or 120–370VDC. Do not connect directly to 380VAC three-phase.
What protection functions does the MDR-60-12 include?
Short-circuit protection, overload protection (above 105%, hiccup mode auto-recovery) and over-voltage protection (13.8–16.2V, shutdown and re-power to recover).
Is the MDR-60-12 DIN rail mountable?
Yes, TS35/7.5 or TS35/15 DIN rail, 40 mm housing width, vertical orientation only.
What are the dimensions and weight of the MDR-60-12?
40 × 90 × 100 mm (W × H × D), approximately 0.30 kg.
What is the terminal pin assignment of the MDR-60-12?
TB1: Pin 1 = FG, Pin 2 = AC/N, Pin 3 = AC/L. TB2 (6 pins): Pins 1,2 = +V; Pins 3,4 = −V; Pins 5,6 = DC OK relay contact.
Can the MDR-60-12 drive 12V solenoids or small motors?
Small 12V solenoids or DC motors can be powered if their steady-state and startup current fall within 5A and the inductive kick is suppressed externally. For motors with high startup surge, verify the inrush current does not exceed the 105–150% overload window and add a flyback diode for inductive loads.
What is the ripple and noise of the MDR-60-12?
Maximum 120mVp-p, measured at 20MHz bandwidth with a 0.1μF and 47μF parallel capacitor.
What certifications does the MDR-60-12 have?
UL508, UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004, BSMI CNS14336-1 and AS/NZS 60950.1. MDR-60-12 is also certified for Class I, Division 2 Hazardous Locations T4 (confirm certificate coverage for your market).
13 ulasan untuk MDR-60-12 12V 5A 60W AC DC Industrial DIN rail power supply
-
Produk berfungsi dengan baik Produk Real Pict Produk Sesuai Deskripsi Packaging Rapi & Aman
-
cepat sampai semoga manfaat dan berfungsi
-
Produk Original Packaging Rapi & Aman Produk Sesuai Deskripsi
-
kualitas oke, berfungsi dengan baik sesuai deskripsi
-
Produk Sesuai Deskripsi
-
-
-
-
-
Hanya pelanggan yang telah membeli produk ini dapat memberikan ulasan.
Pilihan lainnya untukmu
SCJ50X75-50 SCJ50-75-50 SCJ50*75-50 Bore 50mm Double Acting Adjustable Air Cylinder KP71
Rp674,500.00 SKU:KP71
Lihat produk terkait
PT (pemilik terverifikasi) –
Produk berfungsi dengan baik Produk Real Pict Produk Sesuai Deskripsi Packaging Rapi & Aman
Mahe** (pemilik terverifikasi) –
cepat sampai semoga manfaat dan berfungsi
Sylv*** (pemilik terverifikasi) –
Produk Original Packaging Rapi & Aman Produk Sesuai Deskripsi
Sand* (pemilik terverifikasi) –
kualitas oke, berfungsi dengan baik sesuai deskripsi
Dieg* (pemilik terverifikasi) –
Produk Sesuai Deskripsi
Mahe** (pemilik terverifikasi) –
Yudi (pemilik terverifikasi) –
Yudi (pemilik terverifikasi) –
Rosi** (pemilik terverifikasi) –
Rosi** (pemilik terverifikasi) –