Tidak ada produk di keranjang.
DR-60-24 60W 24V 2.5A Class II DIN Rail Power Supply
Rp190,000.00
VOUCHER
Diskon 5% min. belanja Rp1JT
🔥 9 items sold in last 3 jam
32 orang sedang melihat produk ini sekarang
Tanya dulu via WhatsApp
DAPPRA DR-60-24 (SKU: PM23) is a 60W single output classic step-shape industrial DIN rail power supply with 24V DC / 2.5A output. Class II double insulation (no PE required), slim 78 mm plastic housing, fanless natural convection cooling, TS35 DIN rail mounting — ideal for building automation and general industrial control.
Share:
Overview
DR-60-24 Overview
The DAPPRA DR-60-24 (SKU: PM23) is a 60W single-output Class II double-insulated DIN rail power supply in the DR Series. It provides a stable 24V DC output at 2.5A from a universal 85–264 VAC input or 120–370 VDC input, with 84% typical efficiency and a ±10% output adjustment range of 21.6–28.8V.
Sharing the same 78 mm wide plastic step-shape housing as the DR-30, the DR-60-24 doubles the output current while maintaining Class II double insulation — no FG/PE terminal is provided and no grounding connection is required. This makes it well-suited to building automation, household control and general industrial control cabinets where a protective earth conductor may not be available. Protection includes short circuit, overload (105–150% constant current limiting, auto-recovery) and over-voltage (28.8–33.6V, shut-down and re-power). Ripple is 150mVp-p and no-load consumption is below 0.5W.
Key Features
DR-60-24 Key Features
Engineered for 24V loads up to 2.5A in Class II building and industrial control cabinets.
- 60W Output · 24V / 2.5A24V DC at 2.5A (0–2.5A), 60W. +V ADJ 21.6–28.8V.
- Class II Double InsulationPlastic step-shape housing, no FG/PE terminal, no grounding required.
- Universal AC Input 85–264VACFull-range single-phase input; also 120–370 VDC.
- 84% Typical EfficiencyReduces energy consumption and heat generation.
- 78 mm Step-Shape Housing78 × 93 × 56 mm; shares footprint with DR-30 for consistent panel layout.
- Fanless Natural Convection CoolingNo dust intake, no acoustic noise, no moving parts.
- Overload 105–150%Constant current limiting, auto-recovery.
- No-Load <0.5WEnergy-efficient standby.
- TS35 DIN Rail · UL508 · 3-Year WarrantyStandard TS35/7.5 or TS35/15 rail.
Specifications
DR-60-24 Specifications
Output
| DC Voltage | 24V |
| Rated Current | 2.5A |
| Current Range | 0–2.5A |
| Rated Power | 60W |
| Ripple | 150mVp-p |
| Adjustment | 21.6–28.8V |
| Tolerance | ±1.0% |
Input
| Voltage | 85–264VAC · 120–370VDC |
| Efficiency | 84% |
| No-Load | <0.5W |
| AC Current (Typ.) | 1.5A/115VAC · 0.9A/230VAC |
Protection
| Overload | 105–150% · Constant current limiting · Auto-recovery |
| Over Voltage | 28.8–33.6V · Shut down, re-power to recover |
| Short Circuit | Protected |
Environment
| Working Temperature | −20 ~ +60°C (Derating above +40°C) |
| Working Humidity | 20–90% RH non-condensing |
| Storage Temp., Humidity | −40 ~ +85°C, 10–95% RH |
| Vibration | 10–500Hz, 2G 10min./1cycle, 60min. each axis |
Safety & EMC
| Safety Standards | UL508, TUV EN60950-1 |
| Withstand Voltage | I/P-O/P: 3KVAC |
| Isolation Class | Class II (no FG/PE) |
| EMC Emission | EN55022 Class B |
| EMC Immunity | EN61000-6-2 industrial immunity |
Reliability & Dimensions
| Dimensions (W×H×D) | 78 × 93 × 56 mm |
| Weight | Approx. 0.3 kg |
| Housing | Plastic, step-shape, Class II |
| Warranty | 3 Years |
Front Panel
| +V ADJ | Output voltage adjustment potentiometer (21.6–28.8V) |
| LED | Power-on indicator |
| Isolation | Class II (no PE required) |
Notes
24V / 2.5A / 60W, Class II double insulated. No FG/PE terminal. Ripple 150mVp-p. Efficiency 84%. Derating above +40°C.
Dimensions
DR-60-24 Dimensions
78 mm step-shape plastic housing, 93 mm height. All dimensions in mm, tolerance ±1 mm.
Mechanical
| Width (W) | 78 mm |
| Height (H) | 93 mm |
| Depth (D) | 56 mm |
| Weight | Approx. 0.3 kg |
| Housing | Plastic, Class II |
Clearances
| Top/Bottom | 40 / 20 mm |
| Sides | 5 mm |
| DIN Rail | TS35/7.5 or 15 |
| Adjacent Heat Source | 100–150 mm recommended |
Installation
DR-60-24 Installation
01 / 06
Mounting Orientation
Input terminals on the right, output terminals on the left. Other orientations are not allowed for adequate cooling.
02 / 06
Ventilation Clearance
5 mm sides, 40 mm top, 20 mm bottom. 100–150 mm from heat sources.
03 / 06
TS35 Rail
TS35/7.5 or 15. Tilt, fit, slide, lock, check.
04 / 06
Class II — No PE
No grounding required. Plastic housing prevents user contact with hazards.
05 / 06
Temperature
−20 to +60°C, derate above +40°C.
06 / 06
Pollution Degree 2
Dry, ventilated control cabinet.
Wiring
DR-60-24 Wiring
TB1 — Input
| Pin | Assignment |
|---|---|
| 1 | AC/N |
| 2 | AC/L |
TB2 — Output
| Pin | Assignment |
|---|---|
| +V | DC OUTPUT +V |
| −V | DC OUTPUT −V |
| LED | Power-on indicator |
| ADJ | +V ADJ potentiometer |
Class II model — no FG/PE terminal. Verify terminal labels before wiring. Use copper wire rated at least 80°C, such as UL1007.
DC Output Voltage Adjustment
The DR-60-24 includes a front-panel +V ADJ potentiometer with a 21.6–28.8V range. Output current and wattage must not exceed the rated 2.5A / 60W.
Safety
DR-60-24 Safety & Cautions
- Qualified technician only.
- Do not connect primary and secondary.
- Burn hazard.
- Protect openings.
- Do not exceed 2.5A / 60W.
- Disconnect before maintenance.
- Class II — no PE, but final equipment must comply with safety/EMC.
- Component for final equipment; re-confirm EMC.
Applications
DR-60-24 Industrial Applications
24V Relay Banks
24V Sensors
Building Automation
Household Control
Industrial Control
Security Systems
Network Equipment
Machine Control
Next Step
Need the DR-60-24?
Contact DAPPRA Automation — or explore the full DR Series.
Support
DR-60-24 FAQ
What is the DAPPRA DR-60-24?
The DAPPRA DR-60-24 (SKU: PM23) is a 60W single-output Class II double-insulated DIN rail power supply providing 24V DC at 2.5A. It features a 78 mm wide plastic step-shape housing, universal 85–264VAC input, 84% typical efficiency, and requires no grounding connection.
What is the input voltage range of the DR-60-24?
85–264VAC (single phase) or 120–370VDC. Suitable for global mains voltages without external selection switches.
Is the DR-60-24 Class II double insulated?
Yes. Class II double insulated with a plastic step-shape housing. No FG/PE terminal and no grounding connection required, simplifying installation in building automation and household control systems.
What is the output voltage adjustment range of the DR-60-24?
21.6–28.8V via the front-panel +V ADJ potentiometer (±10% of 24V). Sufficient for voltage-drop compensation without exceeding the tolerance of most 24V industrial devices.
What is the over-voltage protection threshold of the DR-60-24?
Approximately 28.8–33.6V (120–140% of 24V). The output shuts down and requires re-powering to recover.
What is the overload protection behavior of the DR-60-24?
105–150% rated output power, constant current limiting, auto-recovery after fault removed.
What is the ripple and noise of the DR-60-24?
Maximum 150mVp-p at 20MHz bandwidth with 0.1μF & 47μF parallel capacitor.
What are the dimensions and weight of the DR-60-24?
78 × 93 × 56 mm (W × H × D), approximately 0.3 kg. The 78 mm width is shared with the DR-30 model.
What is the terminal pin assignment of the DR-60-24?
TB1 (Input): AC/N and AC/L. TB2 (Output): DC OUTPUT +V, DC OUTPUT −V, LED indicator, and +V ADJ. No FG/PE terminal (Class II). Verify terminal labels before wiring.
What is the no-load power consumption of the DR-60-24?
Below 0.5W, supporting energy-efficient standby operation.
What is the operating temperature range of the DR-60-24?
−20°C to +60°C with free air convection cooling. Derating is required above +40°C ambient.
Can the DR-60-24 be used without connecting protective earth?
Yes. Class II double insulated — no protective earth connection required. The plastic housing prevents user contact with electrical hazards.
What certifications does the DR-60-24 have?
UL508 (industrial control equipment) and TUV EN60950-1. Complies with EN61000-6-2 industrial immunity, EN55022 Class B EMC emission and EN61000-3-2 harmonic current standards.
How does the DR-60-24 differ from the DR-30-24?
DR-60-24 doubles output current to 2.5A (60W vs 36W) and shares the same 78 mm housing. Efficiency rises from 83% to 84%. Choose DR-60-24 when the 24V load exceeds 1.5A but stays within 2.5A.
Can the DR-60-24 power a 24V relay bank and several sensors?
Yes, if combined steady-state current stays within 2.5A (60W). Add worst-case relay pull-in current to the sensor draw and verify the total before connecting. If approaching 2.5A, step up to the DR-75-24 (3.2A).
Related Technical Articles
20 ulasan untuk DR-60-24 60W 24V 2.5A Class II DIN Rail Power Supply
Hanya pelanggan yang telah membeli produk ini dapat memberikan ulasan.
Mungkin Anda suka
-
-
-
-
DRM-0840-R Relay Safety Light Curtain Industrial Area Sensor
Rp2,300,000.00 -
DRM-1020-R Relay Safety Light Curtain Industrial Area Sensor
Rp1,520,000.00 -
DRM-0620-R Relay Safety Light Curtain Industrial Area Sensor
Rp1,300,000.00
Related Technical Articles
Overview
DR-60-24 Overview
The DAPPRA DR-60-24 (SKU: PM23) is a 60W single-output Class II double-insulated DIN rail power supply in the DR Series. It provides a stable 24V DC output at 2.5A from a universal 85–264 VAC input or 120–370 VDC input, with 84% typical efficiency and a ±10% output adjustment range of 21.6–28.8V.
Sharing the same 78 mm wide plastic step-shape housing as the DR-30, the DR-60-24 doubles the output current while maintaining Class II double insulation — no FG/PE terminal is provided and no grounding connection is required. This makes it well-suited to building automation, household control and general industrial control cabinets where a protective earth conductor may not be available. Protection includes short circuit, overload (105–150% constant current limiting, auto-recovery) and over-voltage (28.8–33.6V, shut-down and re-power). Ripple is 150mVp-p and no-load consumption is below 0.5W.
Key Features
DR-60-24 Key Features
Engineered for 24V loads up to 2.5A in Class II building and industrial control cabinets.
- 60W Output · 24V / 2.5A24V DC at 2.5A (0–2.5A), 60W. +V ADJ 21.6–28.8V.
- Class II Double InsulationPlastic step-shape housing, no FG/PE terminal, no grounding required.
- Universal AC Input 85–264VACFull-range single-phase input; also 120–370 VDC.
- 84% Typical EfficiencyReduces energy consumption and heat generation.
- 78 mm Step-Shape Housing78 × 93 × 56 mm; shares footprint with DR-30 for consistent panel layout.
- Fanless Natural Convection CoolingNo dust intake, no acoustic noise, no moving parts.
- Overload 105–150%Constant current limiting, auto-recovery.
- No-Load <0.5WEnergy-efficient standby.
- TS35 DIN Rail · UL508 · 3-Year WarrantyStandard TS35/7.5 or TS35/15 rail.
Specifications
DR-60-24 Specifications
Output
| DC Voltage | 24V |
| Rated Current | 2.5A |
| Current Range | 0–2.5A |
| Rated Power | 60W |
| Ripple | 150mVp-p |
| Adjustment | 21.6–28.8V |
| Tolerance | ±1.0% |
Input
| Voltage | 85–264VAC · 120–370VDC |
| Efficiency | 84% |
| No-Load | <0.5W |
| AC Current (Typ.) | 1.5A/115VAC · 0.9A/230VAC |
Protection
| Overload | 105–150% · Constant current limiting · Auto-recovery |
| Over Voltage | 28.8–33.6V · Shut down, re-power to recover |
| Short Circuit | Protected |
Environment
| Working Temperature | −20 ~ +60°C (Derating above +40°C) |
| Working Humidity | 20–90% RH non-condensing |
| Storage Temp., Humidity | −40 ~ +85°C, 10–95% RH |
| Vibration | 10–500Hz, 2G 10min./1cycle, 60min. each axis |
Safety & EMC
| Safety Standards | UL508, TUV EN60950-1 |
| Withstand Voltage | I/P-O/P: 3KVAC |
| Isolation Class | Class II (no FG/PE) |
| EMC Emission | EN55022 Class B |
| EMC Immunity | EN61000-6-2 industrial immunity |
Reliability & Dimensions
| Dimensions (W×H×D) | 78 × 93 × 56 mm |
| Weight | Approx. 0.3 kg |
| Housing | Plastic, step-shape, Class II |
| Warranty | 3 Years |
Front Panel
| +V ADJ | Output voltage adjustment potentiometer (21.6–28.8V) |
| LED | Power-on indicator |
| Isolation | Class II (no PE required) |
Notes
24V / 2.5A / 60W, Class II double insulated. No FG/PE terminal. Ripple 150mVp-p. Efficiency 84%. Derating above +40°C.
Dimensions
DR-60-24 Dimensions
78 mm step-shape plastic housing, 93 mm height. All dimensions in mm, tolerance ±1 mm.
Mechanical
| Width (W) | 78 mm |
| Height (H) | 93 mm |
| Depth (D) | 56 mm |
| Weight | Approx. 0.3 kg |
| Housing | Plastic, Class II |
Clearances
| Top/Bottom | 40 / 20 mm |
| Sides | 5 mm |
| DIN Rail | TS35/7.5 or 15 |
| Adjacent Heat Source | 100–150 mm recommended |
Installation
DR-60-24 Installation
01 / 06
Mounting Orientation
Input terminals on the right, output terminals on the left. Other orientations are not allowed for adequate cooling.
02 / 06
Ventilation Clearance
5 mm sides, 40 mm top, 20 mm bottom. 100–150 mm from heat sources.
03 / 06
TS35 Rail
TS35/7.5 or 15. Tilt, fit, slide, lock, check.
04 / 06
Class II — No PE
No grounding required. Plastic housing prevents user contact with hazards.
05 / 06
Temperature
−20 to +60°C, derate above +40°C.
06 / 06
Pollution Degree 2
Dry, ventilated control cabinet.
Wiring
DR-60-24 Wiring
TB1 — Input
| Pin | Assignment |
|---|---|
| 1 | AC/N |
| 2 | AC/L |
TB2 — Output
| Pin | Assignment |
|---|---|
| +V | DC OUTPUT +V |
| −V | DC OUTPUT −V |
| LED | Power-on indicator |
| ADJ | +V ADJ potentiometer |
Class II model — no FG/PE terminal. Verify terminal labels before wiring. Use copper wire rated at least 80°C, such as UL1007.
DC Output Voltage Adjustment
The DR-60-24 includes a front-panel +V ADJ potentiometer with a 21.6–28.8V range. Output current and wattage must not exceed the rated 2.5A / 60W.
Safety
DR-60-24 Safety & Cautions
- Qualified technician only.
- Do not connect primary and secondary.
- Burn hazard.
- Protect openings.
- Do not exceed 2.5A / 60W.
- Disconnect before maintenance.
- Class II — no PE, but final equipment must comply with safety/EMC.
- Component for final equipment; re-confirm EMC.
Applications
DR-60-24 Industrial Applications
24V Relay Banks
24V Sensors
Building Automation
Household Control
Industrial Control
Security Systems
Network Equipment
Machine Control
Next Step
Need the DR-60-24?
Contact DAPPRA Automation — or explore the full DR Series.
Support
DR-60-24 FAQ
What is the DAPPRA DR-60-24?
The DAPPRA DR-60-24 (SKU: PM23) is a 60W single-output Class II double-insulated DIN rail power supply providing 24V DC at 2.5A. It features a 78 mm wide plastic step-shape housing, universal 85–264VAC input, 84% typical efficiency, and requires no grounding connection.
What is the input voltage range of the DR-60-24?
85–264VAC (single phase) or 120–370VDC. Suitable for global mains voltages without external selection switches.
Is the DR-60-24 Class II double insulated?
Yes. Class II double insulated with a plastic step-shape housing. No FG/PE terminal and no grounding connection required, simplifying installation in building automation and household control systems.
What is the output voltage adjustment range of the DR-60-24?
21.6–28.8V via the front-panel +V ADJ potentiometer (±10% of 24V). Sufficient for voltage-drop compensation without exceeding the tolerance of most 24V industrial devices.
What is the over-voltage protection threshold of the DR-60-24?
Approximately 28.8–33.6V (120–140% of 24V). The output shuts down and requires re-powering to recover.
What is the overload protection behavior of the DR-60-24?
105–150% rated output power, constant current limiting, auto-recovery after fault removed.
What is the ripple and noise of the DR-60-24?
Maximum 150mVp-p at 20MHz bandwidth with 0.1μF & 47μF parallel capacitor.
What are the dimensions and weight of the DR-60-24?
78 × 93 × 56 mm (W × H × D), approximately 0.3 kg. The 78 mm width is shared with the DR-30 model.
What is the terminal pin assignment of the DR-60-24?
TB1 (Input): AC/N and AC/L. TB2 (Output): DC OUTPUT +V, DC OUTPUT −V, LED indicator, and +V ADJ. No FG/PE terminal (Class II). Verify terminal labels before wiring.
What is the no-load power consumption of the DR-60-24?
Below 0.5W, supporting energy-efficient standby operation.
What is the operating temperature range of the DR-60-24?
−20°C to +60°C with free air convection cooling. Derating is required above +40°C ambient.
Can the DR-60-24 be used without connecting protective earth?
Yes. Class II double insulated — no protective earth connection required. The plastic housing prevents user contact with electrical hazards.
What certifications does the DR-60-24 have?
UL508 (industrial control equipment) and TUV EN60950-1. Complies with EN61000-6-2 industrial immunity, EN55022 Class B EMC emission and EN61000-3-2 harmonic current standards.
How does the DR-60-24 differ from the DR-30-24?
DR-60-24 doubles output current to 2.5A (60W vs 36W) and shares the same 78 mm housing. Efficiency rises from 83% to 84%. Choose DR-60-24 when the 24V load exceeds 1.5A but stays within 2.5A.
Can the DR-60-24 power a 24V relay bank and several sensors?
Yes, if combined steady-state current stays within 2.5A (60W). Add worst-case relay pull-in current to the sensor draw and verify the total before connecting. If approaching 2.5A, step up to the DR-75-24 (3.2A).
20 ulasan untuk DR-60-24 60W 24V 2.5A Class II DIN Rail Power Supply
Hanya pelanggan yang telah membeli produk ini dapat memberikan ulasan.
Pilihan lainnya untukmu
P28K4Q 7 Pin P28 core 7 Pin aviation plug connector socket round connector SX86
Rp135,000.00 SKU:SX86
Lihat produk terkait
Susi** (pemilik terverifikasi) –
Zeky (pemilik terverifikasi) –
Hend** (pemilik terverifikasi) –
noto (pemilik terverifikasi) –
Part (pemilik terverifikasi) –
Part (pemilik terverifikasi) –
Heri (pemilik terverifikasi) –
Ardh* (pemilik terverifikasi) –
Ardh* (pemilik terverifikasi) –
Ridw** (pemilik terverifikasi) –