E3FA-DP12 E3FA – DP12 E3FA 2M PNP Photoelectric Sensor PT67

E3FA-DP12 E3FA – DP12 E3FA 2M PNP Photoelectric Sensor PT67

Description:
Diffuse-reflective, Sensing distance White paper 300 x 300 mm: 300 mm, Light-ON/Dark-ON selectable, PNP, Pre-wired models (2 m), Red LED (624 nm)

Feature:
Shape Cylinder type
Sensing method Diffuse-reflective
Sensing distance White paper 300 x 300 mm: 300 mm
Spot size 40 x 50 mm (sensing distance: 300 mm)
Differential distance 20% max.
Light source Red LED (624 nm)
Power supply voltage 10 to 30 VDC±10% ripple (p-p) 10% included
Current consumption 25 mA max.
Control output PNP open collector
30 VDC max.
100 mA max.
Residual voltage: 3 V max.
Operation mode Light-ON/Dark-ON selectable
Protective circuit Output short-circuit protection, Output reverse polarity protection, Power supply reverse polarity protection
Response time Operate or reset: 0.5 ms max.
Sensitivity setting Single-turn adjustment
Ambient illuminance Incandescent lamp: 3,000 lx max.
Sunlight: 10,000 lx max.
Ambient temperature range (Operating) -25 to 55 ℃ (with no freezing or condensation)
Ambient temperature range (Storage) -40 to 70 ℃ (with no freezing or condensation)
Ambient humidity range (Operating) 35 to 85% (with no condensation)
Ambient humidity range (Strage) 35 to 95% (with no condensation)
Insulation resistance 20 MΩ min. (500 VDC megger)
Dielectric strength Between charged parts and the case: 1000 VAC 50/60 Hz 1 min
Vibration resistance Destruction: 10 to 55 Hz, 1.5 mm double amplitude each in X, Y, and Z directions for 2 h
Shock resistance Destruction: 500 m/s2 3 times each in X, Y and Z directions
Degree of protection IEC: IP67
DIN40050-9: IP69K
Connection method Pre-wired models (Cable length 2 m)
Indicator Operation indicator (orange), Stability indicator (green)
Accessories Instruction sheet, M18 nuts