RS485 485 to Ethernet Device Server MODBUS RTU TO TCP AN75

RS485 485 to Ethernet Device Server MODBUS RTU TO TCP AN75 The module is stable performance, cost-effective industrial grade embedded networking terminal, which uses eight processors, has a wealth of storage and management capabilities to provide RS232 / 485 to TCP / IP network of two-way flow of physical transmission channel, can easily upgrade the original equipment networking. 8-bit processor, automatically detect 10M / 100m Ethernet, ETHERNET, ARP, IP, UDP, TCP, ICMP protocol, selectable operating modes: TCP Server, TCP Client, UDP Server, UDP Client, MODBUS TCP, MODBUS -RTU, MODBUS-ASCII other models, support for inter-gateway, across routing traffic. TCP SERVER mode supports four TCP connections. 100M high-speed LAN, 10 / 100M adaptive Ethernet interface; Support AUTO MDI / MDIX, you can use a crossover cable or a parallel network connections; UART baud rates from 110 bps to 115200bps can be set; operating mode TCP Client, TCP Server, UDP, MODBUS TCP, MODBUS-RTU, MODBUS-ASCII and other operating modes; Support for virtual serial port mode transparent transmission; across the gateway, across switches, routers; can work in LAN, also can work on the Internet (ie outside the network); working port, destination IP address and port can be easily set their own; (settings available through our software settings) network is disconnected automatically disconnected, ensure that the entire network and reliable TCP connection establishment; Flexible serial data sub-frame is set to meet user demand for a variety of subcontractors; Product Features: LAN Ethernet: 10 / 100M bps; Protection: Built 2KV electromagnetic isolation; RS485 serial port * 1: A, B, GND; Baud rate: Baud rate from 110bps to 115200 bps can be set. network protocols: ETHERNET, ARP, IP, UDP, TCP, ICMP; tools: module configuration software, TCP / UDP test tools, serial debugging software;